Epoxy resin
ProteX Epoxy resin - Set
Especially for sealing concrete in a core hole
ProteX
Core Hole Sealing
Type selection
ProteX Epoxy resin - Set
Fields of application
For coating and preservation of core drilled holes
Material
Two-component epoxy resin
Properties
Pot life at 20 °C : approx. 90 min., higher temperatures shorten the pot life
Drying at 20 °C ambient temperature: min. 12 hours continuous operating
temperature: max. 70 °C
Color: white
Sizes
Content: 1,1 kg, sufficient for approx. 3,5 sqm
Core Hole Sealing
ProteX Core Hole Sealing
ProteX Core Hole Sealing
Fields of application
Priming of core-drillings and sealing with special paint
Material
Container of primer and container of special paint
Properties
Primer color:
Color: colorless
Drying at 20 °C: overcoatable after approx. 1 hour
Special paint color:
Color: pebble grey
Drying at 20 °C: Seal can be installed after approx. 12 hours continuous operating temperature: max. -10 °C to max. 50 °C
Sizes
Content: 0.33 liter, sufficient for approx. 1.5 sqm
Product Information
Properties ProteX Epoxy Resin
- Short drying time
- Two-component epoxy resin
- Fully-hardened, white protective coating has a smooth, viscoelastic surface and is insensitive to shocks and impacts
- The treated surface has a very good resistance to alkalis and acids and is seawater proof
Fields of application
- Especially for sealing the concrete of a core hole
- The coating is suitable for indoor and outdoor use as a non-porous protective coating for concrete, fiber cement, masonry, steel, wood and other materials
Description
The resin can be used at ambient temperature of 5 °C upwards. The surface to be coated must be cleaned and carefully dried by preheating the surface, smooth surfaces need to be roughened beforehand with emery cloth grain size 60 or coarser, the abrasive dust is to be removed afterwards. The hardener is added to the can with the liquid plastic and stirred well. The layer thickness is approx. 0.25 mm per coat, up to three coats can be applied if required.
Notes
Please consider also the publications of the german institution "Berufsgenossenschaft der Bauwirtschaft (BG Bau)" regarding the handling of epoxy resins.
Properties ProteX Core Hole Sealing
- The base coat of a colorless primer provides a good adhesive base and closes small pores and capillaries in the concrete.
- The special paint used is a chlorinated rubber paint in pebble grey. In combination, this provides an optimal sealing of core drillings and additionally protects any exposed reinforcements from corrosion.
- The coating is suitable for indoor and outdoor use as a pore-free protective coating for the use of annular space. The hardened, gray protective coating has a smooth surface and is insensitive to shocks and impacts.
Fields of application
- Especially for sealing concrete in a core hole
- The coating is suitable for indoor and outdoor use as a pore-free protective coating for concrete, fiber cement, masonry, steel, wood, and other materials.
Description
The system can be used from an ambient temperature of 5 °C to 30 °C. The surface to be coated must be cleaned and thoroughly dried by preheating the surface. Smooth surfaces must first be roughened with emery cloth, grain size 60 or coarser. The abrasive dust must then be removed. Stir the contents of the containers well before use, then use a brush to cover the surface evenly. After application of the primer and a flash-off time at room temperature of approx. 1 hour, the coating can be applied.
Notes
The layer thickness of the special paint is approx. 0.1 mm per layer, up to three coats can be applied if required. After application, carefully close the can. When properly stored, the paint is reusable.