Kebu-Tape
Kebu-Tape
Cold- and warm processed anti-corrosion
tapes for pipe covering
Kebu
Corrosion Protection Tape
Type selection
Kebu-Tape
Fields of application
Suitable for above-ground metallic components, grounding of lightning conductors and wooden poles; also suitable to a limited extent for use for protection of buried pipelines
Material
Technical Vaseline with mineral fillers and synthetic carrier
Properties
Cold-processed anti-corrosion tape; continuous operating temperature up to 30 °C
Sizes
Roll length 10 m / width 50, 100 mm; special lengths and widths on request
Petro-Tape
Kebu Petro-Tape A303
Kebu Petro-Tape A303
Fields of application
Suitable for coating steel pipes and subsequently coating the area of welded seams on steel pipelines with factory coating, also for coating fittings and flange connections with Kebu Plast Mastic and Rockshield net PP 1000
Material
Polyolefin modified petrolatum, synthetic fiber inlay and laminated PE tape
Properties
Cold-processed anti-corrosion tape; load class A 30; good adhesive strength and elasticity as well as increased drip resistance; PE tape with high diffusion density to prevent the plastic compound from being rinsed out as a result of changes in the ground water; maximum continuous operating temperature up to 30 °C
Sizes
Roll length 10 m / width 50, 100, 150, 200, 250 mm
Plast Mastic
Kebu Plast Mastic
Kebu Plast Mastic
Fields of application
Filling compound based on petrolatum to fill in cavity-endangered areas, for example before wrapping valves and flanges with petrolatum tapes
Material
Industrial petroleum; fillers; fibers
Properties
Cold-processed mastic; plasticizable, duroplastic; continuous operating temperature up to 30 °C
Sizes
PE bag 0.5 kg; box 7.5 kg; box 12.5 kg
Bitumen-Tape
Kebu Bitumen-Tape Special
Kebu Bitumen-Tape Special
Fields of application
Suitable for subsequent coating of factory-coated pipes and pipe fittings. Also suitable for steel pipelines & pipe fittings.
Material
Modified bitumen with pre-impregnated synthetic fabrics
Properties
Warm-processed anti-corrosion tape; load class B 30 in combination with Kebusol Primer B III; high degree of softening; low breaking point; maximum continuous operating temperature up to 30 °C
Sizes
Roll length 10 m / width 100, 150, 200, 250 mm
Bitumen-Tape
Kebu Bitumen-Tape GW
Kebu Bitumen-Tape GW
Fields of application
Suitable for subsequent coating of factory-coated pipes and molded pipe parts. Also suitable for coating steel pipelines, pipe fittings and repair spots where mechanical damage to the factory coating has occurred.
Material
Modified bitumen with pre-impregnated glass fabrics
Properties
Warm-processed anti-corrosion tape; Load class B 30 in combination with Kebusol primer B III; High degree of softening; Low breaking point; Maximum continuous operating temperature up to 30 °C
Sizes
Roll length 10 m / width 100, 250 mm; other widths on request
Primer B III
Kebusol-Primer B III
Kebusol-Primer B III
Fields of application
Primer for Kebu Bitumen-Tape Special and Kebu Bitumen-Tape GW; suitable for steel and other metal surfaces, also for factory coatings made of PE, PP, EP and PUR
Material
Adhesion promoting, solvent-based primer based on bitumen and unsaponifiable resins
Properties
Drying time approx. 3-5 minutes (depending on weather conditions)
Sizes
Container 1l; 5l; 10l
B 80-C
Kebulen-Tape B 80-C
Kebulen-Tape B 80-C
Fields of application
Suitable for coating steel pipes and subsequently coating the area of welded seams on steel pipelines with factory coating.
Material
Co-extruded three-layer tape on a butyl rubber basis; backing material polyethylene
Properties
Single tape system, cold-processed anti-corrosion tape; Load class C 50 in a 4-layer application or B 50 in a three-layer application in combination with Kebutyl primer K III; Fully weldable; Compatible with factory coatings made of PE, PP, epoxy resin, PU and bitumen; Operating temperature up to 50 °C; Black or yellow
Sizes
Roll length 15 m / width 30, 50,100 mm;
Black additionally roll length 50 m / width 100 mm
System B 30
Kebutyl System B 30
Kebutyl System B 30
Fields of application
Suitable for coating steel pipes, also subsequent coating of the area of welded seams on already factory coated steel pipes
Material
Consisting of Kebulen-Tape 1,5 and Kebulen Tape PE 0,40 or 0,25, Kebutyl Primer K III
Properties
Cold-applied two-tape corrosion protection system; continuous operating temperature up to approx. 30 °C
Sizes
See Kebulen-Tape 1,5 / 1,5 H / 1,2 H, Kebutyl Primer K III and Kebulen Tape PE 0,40 / 0,25
Kebulen-Tape
Kebulen-Tape
Kebulen-Tape 1,5/1,5 H/1,2 H
Fields of application
Inner layer of Kebutyl Systems
Material
Butyl rubber basis
Properties
Welded in overlap area; compatible with factory coatings made of PE, PP, epoxy resin, PU and bitumen; operating temperature up to 50 °C;
Sizes
Roll length 10 m / width 30, 50, 100 mm;
Roll length 5 m / width 30, 50 mm
Tape PE
Kebulen-Tape PE 0,40 / 0,25
Kebulen-Tape PE 0,40 / 0,25
Fields of application
Outer layer of Kebutyl Systems B 30
Material
One-sided, self-adhesive plastic tapes on polyethylene-basis
Properties
High moisture impermeability; excellent specific wrap resistance; elastic and stretchable
Sizes
Roll length 10 m / width 30, 50, 100 mm
Primer K III
Kebutyl-Primer K III
Kebutyl-Primer K III
Fields of application
Primer for Kebulen-Tape B 80-C and Kebutyl-Systeme; suitable for steel and other metal surfaces, as well as for factory coatings made of PE, PP, EP and PUR
Material
Adhesion-promoting primer made of butyl rubber and unsaponifiable resins in an organic solvent
Properties
Drying time: approx. 3-5 minutes (depending on weather conditions)
Sizes
Container 1l; 5l
PVC Tape
Kebu PVC Insulation Tape
Kebu PVC Insulation Tape
Fields of application
Especially suitable for insulation and bundling wires, repairing damaged insulation, and marking of wires
Material
Adhesive tape with adhesive layer based on synthetic rubber in black, red, blue, white, yellow, brown, green, grey, and transparent
Properties
Excellent electrical insulation; good adhesion; elastic; UV-resistant; moisture-resistant; waterproof; solvent-resistant; self-extinguishing
Sizes
Roll length 10 m / width 15, 19, 50, 100 mm
Kebutyl-Putty
Kebutyl-Putty
Kebutyl-Putty
Fields of application
Suitable for repairing damaged areas on factory PE-coated steel pipes and for filling cavity-endangered areas
Material
Butyl rubber-based mastic; permanently plastic
Properties
Permanently plastic; does not harden; can be shaped by hand
Sizes
Roll 2 m x 40 mm x 5 mm; bolt/bar 1 kg
Repa-Tape
Kebu Repa-Tape
Kebu Repa-Tape
Fields of application
All-purpose sealing tape
Material
Tape made of a self-adhesive compound (butyl) and weather-resistant aluminium-PET composite film
Properties
Bitumen-free; high tear resistance; excellent adhesive strength
Sizes
Roll length 10 m / width 50, 75, 100, 150, 300 mm
Download
Suitable Accessories
Kebumat ST
Kebumat GR
Rockshield PP
Certificates
To offer our customers the best possible quality and service, we are organized according to DIN EN ISO 9001:2015
and have this continuously checked and certified.
CERTIFICATE ISO 9001:2015
This certification documents our conformity of the quality management system
AEO CERTIFICATE
Authorized Economic Operator "AEOC (customs simplification)"
Corrosion and pipe protection
DVGW TYPE EXAMINATION CERTIFICATE; DIN 30672, DIN EN 12068
• Kebu Petro-Tape A303, A 30
• Kebu Bitumen-Tape Special, B 30
• Kebu Bitumen-Tape GW, B 30
• Kebulen System B 80-C, B 50 / C 50
• Kebutyl System B 30